Blackbox LB611A User Manual

3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power User's Manual Release 2.08

User Manual Publication date: March, 2006 Revision A2 2 1. Introduction 1-1. Overview of 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch wit

User Manual Publication date: March, 2006 Revision A2 92 3-9-2. STP Configuration The STP, Spanning Tree Protocol, actually includes RSTP. In the

User Manual Publication date: March, 2006 Revision A2 93 Forward Delay: You can set the root bridge forward delay time. This figure is set by root br

User Manual Publication date: March, 2006 Revision A2 94 3-9-3. STP Port Configuration Function name: STP Port Setting Function description: In t

User Manual Publication date: March, 2006 Revision A2 95 802.1w RSTP recommended value: (Valid range: 1 – 200,000,000) 10 Mbps : 2,000,000 100 Mb

User Manual Publication date: March, 2006 Revision A2 96 M Check: Migration Check. It forces the port sending out an RSTP BPDU instead of a legac

User Manual Publication date: March, 2006 Revision A2 97 3-10. Trunking Configuration The Port Trunking Configuration is used to configure the settin

User Manual Publication date: March, 2006 Revision A2 98 Per Trunking Group supports a maximum of 4 ready member-ports. Please note that some deci

User Manual Publication date: March, 2006 Revision A2 99 Function name: Port Setting/Status Function description: Port setting/status is used to con

User Manual Publication date: March, 2006 Revision A2 100 Aggtr: Aggtr is an abbreviation of “aggregator”. Every port is also an aggregator, and i

User Manual Publication date: March, 2006 Revision A2 101 Function name: Aggregator View Function description: To display the current port trunking

User Manual Publication date: March, 2006 Revision A2 3 10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE 802.3/u/x/z Gigabit, Fast

User Manual Publication date: March, 2006 Revision A2 102 Function name: LACP Detail (LACP Aggregator Detailed Information) Function description

User Manual Publication date: March, 2006 Revision A2 103 Function name: LACP System Configuration Function description: It is used to set the pri

User Manual Publication date: March, 2006 Revision A2 104 3-11. 802.1x Configuration 802.1x port-based network access control provides a method to

User Manual Publication date: March, 2006 Revision A2 105 The overview of operation flow for the Fig. 3-43 is quite simple. When Supplicant PAE issue

User Manual Publication date: March, 2006 Revision A2 106 The Fig. 3-45 shows the procedure of 802.1x authentication. There are steps for the

User Manual Publication date: March, 2006 Revision A2 107 8. If user ID and password is correct, the authentication server will send a Radius-Access

User Manual Publication date: March, 2006 Revision A2 108 Only MultiHost 802.1X is the type of authentication supported in the switch. In this mod

User Manual Publication date: March, 2006 Revision A2 109 Function name: 802.1x State Setting Function description: This function is used to confi

User Manual Publication date: March, 2006 Revision A2 110 Function name: 802.1x Mode Setting Function description: Set the operation mode of 802.

User Manual Publication date: March, 2006 Revision A2 111 Function name: Port Security Management Function description: Shows each port status. In M

User Manual Publication date: March, 2006 Revision A2 4 • Key Features in the Device QoS: Support Quality of Service by the IEEE 802.1P standard.

User Manual Publication date: March, 2006 Revision A2 112 Function name: Param. Setting Function description: This function is used to configure

User Manual Publication date: March, 2006 Revision A2 113 reAuthEnabled: Choose whether regular authentication will take place in this port. Default:

User Manual Publication date: March, 2006 Revision A2 114 3-12. Alarm Configuration Function name: Events Configuration Function descript

User Manual Publication date: March, 2006 Revision A2 115 Fig. 3-50 Function name: Email/SMS Configuration Function description: Alarm configurat

User Manual Publication date: March, 2006 Revision A2 116 Parameter description: Email: Mail Server: the IP address of the server transferring y

User Manual Publication date: March, 2006 Revision A2 117 3-13. Configuration The switch supports three copies of configuration, including the defaul

User Manual Publication date: March, 2006 Revision A2 118 3-13-1. Save/Restore Function name: Save As Start Configuration Function description: S

User Manual Publication date: March, 2006 Revision A2 119 Function name: Restore Default Configuration (includes default IP address) Function descri

User Manual Publication date: March, 2006 Revision A2 120 Function name: Restore User Configuration Function description: Restore User Configurat

User Manual Publication date: March, 2006 Revision A2 121 3-13-2. Config File Function name: Config File Function description: With this function, u

User Manual Publication date: March, 2006 Revision A2 5 1-2. Checklist Before you start installing the switch, verify that the package contains the

User Manual Publication date: March, 2006 Revision A2 122 3-14. Security Function name: Mirror Configuration Function description: Mirror Config

User Manual Publication date: March, 2006 Revision A2 123 Function name: Isolated Group Function description: Isolated Group function can let the po

User Manual Publication date: March, 2006 Revision A2 124 Function name: Restricted Group Function description: The function of the Restricted Gr

User Manual Publication date: March, 2006 Revision A2 125 3-15. Bandwidth Management Function name: Ingress Bandwidth Setting Function description:

User Manual Publication date: March, 2006 Revision A2 126 Function name: Egress Bandwidth Setting Function description: Egress Bandwidth Setting f

User Manual Publication date: March, 2006 Revision A2 127 Function name: Storm Setting Function description: Bandwidth Management function is used t

User Manual Publication date: March, 2006 Revision A2 128 Storm Rate : Set up the limit of bandwidth for storm type you choose. Valid value of th

User Manual Publication date: March, 2006 Revision A2 129 3-16. QoS(Quality of Service) Configuration The switch supports 5 kinds of QoS, are as foll

User Manual Publication date: March, 2006 Revision A2 130 The QoS functions as we mentioned above are able to enabled at the same time. But, the f

User Manual Publication date: March, 2006 Revision A2 131 Function name: QoS Global Setting Function description: When you want to use QoS function,

User Manual Publication date: March, 2006 Revision A2 6 • Management • Supports concisely the status of port and easily port configuration • S

User Manual Publication date: March, 2006 Revision A2 132 Function name: VIP Port Setting Function description: When the port is set as VIP Port,

User Manual Publication date: March, 2006 Revision A2 133 Function name: 802.1p Setting Function description: This function will affect the priority

User Manual Publication date: March, 2006 Revision A2 134 Function name: D-Type TOS Function description: IP TOS Priority affect TOS fields of IP

User Manual Publication date: March, 2006 Revision A2 135 Function name: T-Type TOS Function description: IP TOS Priority affect TOS fields of IP hea

User Manual Publication date: March, 2006 Revision A2 136 Function name: R-Type TOS Function description: IP TOS Priority affect TOS fields of IP

User Manual Publication date: March, 2006 Revision A2 137 Function name: M-Type TOS Function description: IP TOS Priority affect TOS fields of IP he

User Manual Publication date: March, 2006 Revision A2 138 Function name: DSCP Setting Function description: In the late 1990s, the IETF redefined

User Manual Publication date: March, 2006 Revision A2 139 3-17. Diagnostics Three functions, including Diagnostics, Loopback Test and Ping Test are c

User Manual Publication date: March, 2006 Revision A2 140 Function name: Loopback Test Function description: In the Loopback Test function, there

User Manual Publication date: March, 2006 Revision A2 141 Function name: Ping Test Function description: Ping Test function is a tool for detecting

User Manual Publication date: March, 2006 Revision A2 7 1-4. View of 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power

User Manual Publication date: March, 2006 Revision A2 142 3-18. TFTP Server Function name: TFTP Server Function description: Set up IP address of

User Manual Publication date: March, 2006 Revision A2 143 3-19. Log This function shows the log data. The switch provides system log data for users.

User Manual Publication date: March, 2006 Revision A2 144 Upload Log: Upload log data through tftp. Clear Log: Clear log data.

User Manual Publication date: March, 2006 Revision A2 145 3-20. Firmware Upgrade Software upgrade tool is used to help upgrade the software function

User Manual Publication date: March, 2006 Revision A2 146 3-21. Reboot We offer you many ways to reboot the switch, including power up, hardware

User Manual Publication date: March, 2006 Revision A2 147 3-22. Logout You can manually logout by performing Logout function. In the switch, it provi

User Manual Publication date: March, 2006 Revision A2 148 4. Operation of CLI Management 4-1. CLI Management Refer to Chapter 2 for bas

User Manual Publication date: March, 2006 Revision A2 149 Fig. 4-1 Fig. 4-2

User Manual Publication date: March, 2006 Revision A2 150 4-2. Commands of CLI To see the commands of the mode, please input “?” after the prompt,

User Manual Publication date: March, 2006 Revision A2 151 4-2-1. Global Commands of CLI end Syntax: end Description: Back to the top mode. When you

User Manual Publication date: March, 2006 Revision A2 8 • LED Indicators LED Color Function System LED CPURUN Green Blink when CPU is on an

User Manual Publication date: March, 2006 Revision A2 152 help Syntax: help Description: To show available commands. Some commands are the combi

User Manual Publication date: March, 2006 Revision A2 153 history Syntax: history [#] Description: To show a list of previous commands that you had

User Manual Publication date: March, 2006 Revision A2 154 logout Syntax: logout Description: When you enter this command via Telnet connection,

User Manual Publication date: March, 2006 Revision A2 155 restore user Syntax: restore user Description: To restore the startup configuration as us

User Manual Publication date: March, 2006 Revision A2 156 save user Syntax: save user Description: To save the current configuration as the user

User Manual Publication date: March, 2006 Revision A2 157 4-2-2. Local Commands of CLI  802.1x set max-request Syntax: set max-request <port-

User Manual Publication date: March, 2006 Revision A2 158 set port-control Syntax: set port-control <port-range> <authorized> Descri

User Manual Publication date: March, 2006 Revision A2 159 set reAuthMax Syntax: set reAuthMax <port-range> <max> Description: The numb

User Manual Publication date: March, 2006 Revision A2 160 set state Syntax: set state <ip> <port-number> <secret-key> Descrip

User Manual Publication date: March, 2006 Revision A2 161 show mode Syntax: show mode Description: To display the mode of each port. Argument: No

User Manual Publication date: March, 2006 Revision A2 9 1-4-2. User Interfaces on the Rear Panel One RS-232 DB-9 interface is offered for configurati

User Manual Publication date: March, 2006 Revision A2 162 show security Syntax: show security Description: To display the authentication statu

User Manual Publication date: March, 2006 Revision A2 163  account add Syntax: add <name> Description: To create a new guest user. When you

User Manual Publication date: March, 2006 Revision A2 164 modify Syntax: modify <name> Description: To change the username and password of

User Manual Publication date: March, 2006 Revision A2 165  alarm <<email>> del mail-address Syntax: del mail-address <#> Des

User Manual Publication date: March, 2006 Revision A2 166 set server Syntax: set server <ip> Description: To set up the IP address of th

User Manual Publication date: March, 2006 Revision A2 167 <<events>> del all Syntax: del all <range> Description: To disable emai

User Manual Publication date: March, 2006 Revision A2 168 del trap Syntax: del trap <range> Description: To disable the trap of the events

User Manual Publication date: March, 2006 Revision A2 169 set sms Syntax: set sms <range> Description: To enable the sms of the events. Argum

User Manual Publication date: March, 2006 Revision A2 170 show Syntax: show Description: The Show here is used to display the configuration of a

User Manual Publication date: March, 2006 Revision A2 171 show (alarm) Syntax: show Description: The Show for alarm here is used to display the con

User Manual Publication date: March, 2006 Revision A2 10 1-5. View of the Optional Modules In the switch, Port 25, 26 includes two types of media

User Manual Publication date: March, 2006 Revision A2 172 set phone-number Syntax: set phone-number <#> <phone-number> Description:

User Manual Publication date: March, 2006 Revision A2 173 show Syntax: show Description: To display the configuration of SMS trap event. Argument:

User Manual Publication date: March, 2006 Revision A2 174  autologout autologout Syntax: autologout <time> Description: To set up the t

User Manual Publication date: March, 2006 Revision A2 175 set storm-rate Syntax: set storm-rate <range> <data_rate> Description: To s

User Manual Publication date: March, 2006 Revision A2 176  config-file export start Syntax: export start Description: To run the export start

User Manual Publication date: March, 2006 Revision A2 177 import user-conf Syntax: import user-conf Description: To run the import user-conf func

User Manual Publication date: March, 2006 Revision A2 178 show Syntax: show Description: To display the information of the config file. Argume

User Manual Publication date: March, 2006 Revision A2 179  diag diag Syntax: diag Description: Diag is used to test whether UART, DRAM, Flash and

User Manual Publication date: March, 2006 Revision A2 180  firmware set upgrade-path Syntax: set upgrade-path <filepath> Description: T

User Manual Publication date: March, 2006 Revision A2 181  gvrp disable Syntax: disable Description: To disable the gvrp function Argument: None

User Manual Publication date: March, 2006 Revision A2 11 2. Installation 2-1. Starting 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Red

User Manual Publication date: March, 2006 Revision A2 182 FEML2-SW26M(gvrp)# group 2 FEML2-SW26M(gvrp-group-2)# set applicant 1-6 non-participant

User Manual Publication date: March, 2006 Revision A2 183 set applicant Syntax: set applicant <range> <normal|non-participant> Descrip

User Manual Publication date: March, 2006 Revision A2 184 Example: FEML2-SW26M(gvrp)# set restricted 1-10 enable FEML2-SW26M(gvrp)# show config G

User Manual Publication date: March, 2006 Revision A2 185 set timer Syntax: set timer <range> <join> <leave> <leaveall> De

User Manual Publication date: March, 2006 Revision A2 186 show counter Syntax: show counter <port> Description: To show counter of the p

User Manual Publication date: March, 2006 Revision A2 187  hostname hostname Syntax: hostname <name> Description: To set up the hostname

User Manual Publication date: March, 2006 Revision A2 188  IP disable dhcp Syntax: disable dhcp Description: To disable the DHCP function of

User Manual Publication date: March, 2006 Revision A2 189 set ip Syntax: set ip <ip> <mask> <gateway> Description: To set the s

User Manual Publication date: March, 2006 Revision A2 190  log clear Syntax: clear Description: To clear the log data. Argument: None. Possible

User Manual Publication date: March, 2006 Revision A2 191 show Syntax: show Description: To show a list of trap log events. When any of log events

ii Table of Contents CAUTION------------------------------------------------------------------------------------- VII ELECTRONIC EMISSION NOTICES -

User Manual Publication date: March, 2006 Revision A2 12 • TP Port and Cable Installation ⇒ In the switch, TP port supports MDI/MDI-X auto-cross

User Manual Publication date: March, 2006 Revision A2 192  mac-table <<alias>> del Syntax: del <mac> Description: To delet

User Manual Publication date: March, 2006 Revision A2 193 <<information>> search Syntax: search <port> <mac> <vid> D

User Manual Publication date: March, 2006 Revision A2 194 <<maintain>> set aging Syntax: set aging <time> Description: To se

User Manual Publication date: March, 2006 Revision A2 195 Example: FEML2-SW26M(mac-table-maintain)# show Mac table age out time: 300 seconds Port

User Manual Publication date: March, 2006 Revision A2 196 del Syntax: del <mac> Description: To remove the static mac entry. Argument:

User Manual Publication date: March, 2006 Revision A2 197  management add Syntax: Usage: set [<name> <value>] [<vid> <valu

User Manual Publication date: March, 2006 Revision A2 198 delete Syntax: delete # Description: To delete a specific record or range. Argument:

User Manual Publication date: March, 2006 Revision A2 199 edit [#]: the specific management policy entry. Available range: 1 to 65536. Syntax: Usag

User Manual Publication date: March, 2006 Revision A2 200 show Syntax: show Description: To show the specific management policy record. Argument

User Manual Publication date: March, 2006 Revision A2 201  port clear counter Syntax: clear counter Description: To clear all ports’ counter (i

User Manual Publication date: March, 2006 Revision A2 13 2-1-2. Installing Chassis to a 19-Inch Wiring Closet Rail Caution: Allow a proper spacin

User Manual Publication date: March, 2006 Revision A2 202 set flow-control Syntax: set flow-control <range> <symmetric|asymmetric>

User Manual Publication date: March, 2006 Revision A2 203 show conf Syntax: show conf Description: To display the each port’s configuration abou

User Manual Publication date: March, 2006 Revision A2 204 show simple-counter Syntax: show simple-counter Description: To display the summary

User Manual Publication date: March, 2006 Revision A2 205  qos disable 1p Syntax: disable 1p Description: To disable 802.1p qos. Argument: None.

User Manual Publication date: March, 2006 Revision A2 206 disable tos Syntax: disable tos Description: To disable IP TOS qos. Argument: None.

User Manual Publication date: March, 2006 Revision A2 207 enable qos Syntax: enable qos Description: To enable qos function. Argument: None. Pos

User Manual Publication date: March, 2006 Revision A2 208 set pri-tag Syntax: set pri-tag [<q0><priority>] [<q1><priority&

User Manual Publication date: March, 2006 Revision A2 209 Possible value: <type_value>: 0~3 <priority>: 0 to 7 Example: F

User Manual Publication date: March, 2006 Revision A2 210 DiffServ Queue DiffServ Queue DiffServ Queue DiffServ Queue ---------- --

User Manual Publication date: March, 2006 Revision A2 211 show priority-tag Syntax: show priority-tag Description: To show 802.1p Qos configurati

User Manual Publication date: March, 2006 Revision A2 14 2-1-3-2. Cabling Requirements for 1000SX/LX SFP, 100FX Module It is more complex and comp

User Manual Publication date: March, 2006 Revision A2 212 show tos Syntax: show tos Description: To show IP tos Qos configuration. Argument: N

User Manual Publication date: March, 2006 Revision A2 213  reboot reboot Syntax: reboot Description: To reboot the system. Argument: None. Possib

User Manual Publication date: March, 2006 Revision A2 214 <<mirror>> disable Syntax: disable Description: To disable the function

User Manual Publication date: March, 2006 Revision A2 215 show Syntax: show Description: To display the current setting status of mirror. Argument

User Manual Publication date: March, 2006 Revision A2 216  snmp disable Syntax: disable set-community disable snmp Description: The Disable he

User Manual Publication date: March, 2006 Revision A2 217 set Syntax: set get-community <community> set set-community <community> set

User Manual Publication date: March, 2006 Revision A2 218  stp MCheck Syntax: MCheck <range> Description: To force the port to transmit

User Manual Publication date: March, 2006 Revision A2 219 set config Syntax: set config <Bridge Priority> <Hello Time> <Max. Age>

User Manual Publication date: March, 2006 Revision A2 220 show config Syntax: show status Description: To display the STP configuration data. A

User Manual Publication date: March, 2006 Revision A2 221 show status Syntax: show status Description: To display of the status of STP. Argument:

User Manual Publication date: March, 2006 Revision A2 15 2-1-3-3. Switch Cascading in Topology • Takes the Delay Time into Account Theoretically, th

User Manual Publication date: March, 2006 Revision A2 222  system set contact Syntax: set contact <contact> Description: To set the

User Manual Publication date: March, 2006 Revision A2 223 show Syntax: show Description: To display the basic information of the switch. Argument

User Manual Publication date: March, 2006 Revision A2 224  tftp set server Syntax: set server <ip> Description: To set up the IP addres

User Manual Publication date: March, 2006 Revision A2 225  time set daylightsaving Syntax: set daylightsaving <hr> <MM/DD/HH> <mm/d

User Manual Publication date: March, 2006 Revision A2 226 set ntp Syntax: set ntp <ip> <timezone> Description: To set up the current

User Manual Publication date: March, 2006 Revision A2 227  trunk del trunk Syntax: del trunk <port-range> Description: To delete the trunk

User Manual Publication date: March, 2006 Revision A2 228 set trunk Syntax: set trunk <port-range> <method> <group> <activ

User Manual Publication date: March, 2006 Revision A2 229 show lacp-config Syntax: show lacp-config Description: To display the value of LACP Pri

User Manual Publication date: March, 2006 Revision A2 230 show status Syntax: show status Description: To display the aggregator status and th

User Manual Publication date: March, 2006 Revision A2 231  vlan del port-group Syntax: del port-group <name> Description: To delete the por

User Manual Publication date: March, 2006 Revision A2 16 Case1: All switch ports are in the same local area network. Every port can access

User Manual Publication date: March, 2006 Revision A2 232 disable drop-untag Syntax: disable drop-untag <port_range> Description: To disab

User Manual Publication date: March, 2006 Revision A2 233 enable double-tag Syntax: enable double-tag Description: To enable double-tag. Argument:

User Manual Publication date: March, 2006 Revision A2 234 enable symmetric Syntax: enable symmetric Description: To drop frames from the non-mem

User Manual Publication date: March, 2006 Revision A2 235 set pvid Syntax: set pvid <port_range> <pvid> <default_priority> Descri

User Manual Publication date: March, 2006 Revision A2 236 show config Syntax: show config Description: To display the current vlan mode, Symmetr

User Manual Publication date: March, 2006 Revision A2 237 show pvid Syntax: show pvid Description: To display pvid, priority and drop untag result.

User Manual Publication date: March, 2006 Revision A2 238  vs disable Syntax: disable Description: To disable the virtual stack. Argument: None

User Manual Publication date: March, 2006 Revision A2 239 set role Syntax: set role <master|slave> Description: To set role. Argument: <m

User Manual Publication date: March, 2006 Revision A2 240 5. Maintenance 5-1. Resolving No Link Condition The possible causes for a no link LED

User Manual Publication date: March, 2006 Revision A2 241 Appendix A Technical Specifications Features • Supports 3*8-port 10/100M TP with Nway and

User Manual Publication date: March, 2006 Revision A2 17 Case 2b: Port-based VLAN (See Fig.2-5). 1. VLAN1 members could not access VLAN2, VLAN

User Manual Publication date: March, 2006 Revision A2 242 Hardware Specifications  Standard Compliance: IEEE802.3ab / 802.3z / 802.3u / 802.3x

User Manual Publication date: March, 2006 Revision A2 243  Cable and Maximum Length: TP Cat. 5 UTP cable, up to 100m 100Base-FX SC/ST M-M Multi-M

User Manual Publication date: March, 2006 Revision A2 244 Management Software Specifications System Configuration Auto-negotiation support on 1

User Manual Publication date: March, 2006 Revision A2 245 Appendix B Null Modem Cable Specifications The DB-9 cable is used for connecting a termi

User Manual Publication date: March, 2006 Revision A2 18 2-1-4. Configuring the Management Agent of 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed

User Manual Publication date: March, 2006 Revision A2 19 2-1-4-1. Configuring the Switch through the Serial RS-232 Port To perform the configuration

User Manual Publication date: March, 2006 Revision A2 20 • Set IP Address, Subnet Mask and Default Gateway IP Address Please refer to Fig. 2-7 CLI

User Manual Publication date: March, 2006 Revision A2 21 2-1-4-2. Configuring the Management Agent of Switch through the Ethernet Port There are thr

iii 3-2. PORT CONFIGURATION --------------------------------------------------------------49 3-2-1.Port Status -------------------------------------

User Manual Publication date: March, 2006 Revision A2 22 Fig. 2-10 the Login Screen for Web 2-1-5. IP Address Assignment For I

User Manual Publication date: March, 2006 Revision A2 23 With the classful addressing, it divides IP address into three classes, class A, class B and

User Manual Publication date: March, 2006 Revision A2 24 Class D and E: Class D is a class with first 4 MSB (Most significance bit) set to 1-1-1-0

User Manual Publication date: March, 2006 Revision A2 25 In this diagram, you can see the subnet mask with 25-bit long, 255.255.255.128, contains 126

User Manual Publication date: March, 2006 Revision A2 26 For different network applications, the subnet mask may look like 255.255.255.240. This m

User Manual Publication date: March, 2006 Revision A2 27 2-2. Typical Applications The Switch implements 24 Fast Ethernet TP/Fiber ports with auto M

User Manual Publication date: March, 2006 Revision A2 28 Fig. 2-15 Office Network Connection Fig. 2-14 Peer-to-peer Network Connection

User Manual Publication date: March, 2006 Revision A2 29 3. Operation of Web-based Management This chapter instructs you how to configure and man

User Manual Publication date: March, 2006 Revision A2 30 In the switch, it supports a simple user management function allowing only one administra

User Manual Publication date: March, 2006 Revision A2 31 3-1. Web Management Home Overview After you login, the switch shows you the system informati

iv CHAPTER 5. MAINTENANCE------------------------------------------------------- 240 5-1. RESOLVING NO LINK CONDITION-----------------------------

User Manual Publication date: March, 2006 Revision A2 32 • The Information of Page Layout ⎯ On the top side, it shows the front panel of the sw

User Manual Publication date: March, 2006 Revision A2 33 Fig. 3-4 slot detail information In Fig. 3-4, it shows the basic information of the click

User Manual Publication date: March, 2006 Revision A2 34 PortDHCP Boot VLANSystemSNMPIGMP SnoopingMAC TableGVRPRoot STP Trunk802.1XAlarmConfig

User Manual Publication date: March, 2006 Revision A2 35 3-1-1. System Information Function name: System Information Function description: Show the

User Manual Publication date: March, 2006 Revision A2 36 Host IP address: The IP address of the switch. Host MAC address: It is the Ethernet MAC

User Manual Publication date: March, 2006 Revision A2 37 3-1-2. IP Configuration IP configuration is one of the most important configurations in the

User Manual Publication date: March, 2006 Revision A2 38 IP address: Users can configure the IP settings and fill in new values if users set the D

User Manual Publication date: March, 2006 Revision A2 39 DNS: It is Domain Name Server used to serve the translation between IP address and name addr

User Manual Publication date: March, 2006 Revision A2 40 3-1-3. Time Configuration The switch provides manual and automatic ways to set the system

User Manual Publication date: March, 2006 Revision A2 41 NTP: NTP is Network Time Protocol and is used to sync the network time based Greenwich Mean

v Revision History Release Date Revision 2.0 10/17/2005 A1 2.0 11/03/2005 A1 2.01 11/28/2005 A1 2.08 03/01/2006 A2

User Manual Publication date: March, 2006 Revision A2 42 Day Light Saving End : This is used to set when to stop performing the daylight saving ti

User Manual Publication date: March, 2006 Revision A2 43 3-1-4. Account Configuration In this function, only administrator can create, modify or dele

User Manual Publication date: March, 2006 Revision A2 44 3-1-5. Management Policy Through the management security configuration, the manager can d

User Manual Publication date: March, 2006 Revision A2 45 Function name: Management Security Configuration Function description: The switch offers Ma

User Manual Publication date: March, 2006 Revision A2 46 IP Range: The switch supports two kinds of options for managed valid IP Range, including

User Manual Publication date: March, 2006 Revision A2 47 3-1-6. Virtual Stack Function name: Virtual Stack Function description: Virtual Stack Manag

User Manual Publication date: March, 2006 Revision A2 48 Fig. 3-9 Parameter description: State: It is used for the activation or de-acti

User Manual Publication date: March, 2006 Revision A2 49 3-2. Port Configuration Four functions, including Port Status, Port Configuration, Simple Co

User Manual Publication date: March, 2006 Revision A2 50 Function name: Port Status Function Description: Report the latest updated status of all

User Manual Publication date: March, 2006 Revision A2 51 Auto Nego.: Show the exchange mode of Ethernet MAC. There are two modes supported in the swi

vi

User Manual Publication date: March, 2006 Revision A2 52 Fig. 3-12 Parameter description of Port 25 and Port 26: Connector Type: Display the c

User Manual Publication date: March, 2006 Revision A2 53 Vendor SN (Serial Number): Show the serial number assigned by the manufacturer. Date Code:

User Manual Publication date: March, 2006 Revision A2 54 Fig. 3-13 Parameter description of slot 1-3: Serial number: The serial number is assig

User Manual Publication date: March, 2006 Revision A2 55 3-2-2. Port Configuration Port Configuration is applied to change the setting of each port.

User Manual Publication date: March, 2006 Revision A2 56 Speed/Duplex: Set the speed and duplex of the port. In speed, 10/100Mbps baud rate is av

User Manual Publication date: March, 2006 Revision A2 57 3-2-3. Simple Counter The function of Simple Counter collects any information and provides

User Manual Publication date: March, 2006 Revision A2 58 Rx Packet: The counting number of the packet received. Tx Collision: Number of collision

User Manual Publication date: March, 2006 Revision A2 59 3-2-4. Detail Counter The function of Detail Counter collects any information and provides t

User Manual Publication date: March, 2006 Revision A2 60 Rx Unicast Packets: Show the counting number of the received unicast packet. Rx Broadcast

User Manual Publication date: March, 2006 Revision A2 61 Packets 512-1023 Octets: Number of 512 ~ 1023-byte frames in good and bad packets received.

vii Caution Circuit devices are sensitive to static electricity, which can damage their delicate electronics. Dry weather conditions or walking a

User Manual Publication date: March, 2006 Revision A2 62 3-3. SNMP Configuration Any Network Management System (NMS) running the Simple Network Ma

User Manual Publication date: March, 2006 Revision A2 63 Default SNMP function : Enable Default community name for GET: public Default community name

User Manual Publication date: March, 2006 Revision A2 64 3-4. DHCP Boot The DHCP Boot function is used to spread the request broadcast packet int

User Manual Publication date: March, 2006 Revision A2 65 3-5. IGMP Snooping The function, IGMP Snooping, is used to establish the multicast groups to

User Manual Publication date: March, 2006 Revision A2 66 Parameter description: IGMP snooping mode selection: The switch supports three kinds of

User Manual Publication date: March, 2006 Revision A2 67 Function name: Allowed Group Function description: The Allowed Group function allows the IG

User Manual Publication date: March, 2006 Revision A2 68 Add: A new entry of allowed group configuration can be created after the parameters as

User Manual Publication date: March, 2006 Revision A2 69 3-6. VLAN The switch supports Tag-based VLAN (802.1q) and Port-based VLAN. Support 256 act

User Manual Publication date: March, 2006 Revision A2 70 Symmetric Vlan: This is a Ingress Rule (Rule 1, The Ingress Filtering Rule 1 is “forward

User Manual Publication date: March, 2006 Revision A2 71 3-6-2. Tag-based Group Function name: Tag-based Group Configuration Function description:

User Manual Publication date: March, 2006 Revision A2 72 Add Group: Input the VLAN name, VID and then choose the member by ticking the check box b

User Manual Publication date: March, 2006 Revision A2 73 3-6-3. PVID Function name: PVID Function description: In PVID Setting, user can input VID n

User Manual Publication date: March, 2006 Revision A2 74 Drop Untag: Drop untagged frame. You can configure a given port to accept all frames (Ta

User Manual Publication date: March, 2006 Revision A2 75 3-6-4. Port-based Group Function name: Port-based Group Configuration Function description

User Manual Publication date: March, 2006 Revision A2 76 Add Group: Create a new Port-based VLAN. Input the VLAN name and choose the member by tic

User Manual Publication date: March, 2006 Revision A2 77 3-7. MAC Table MAC Table Configuration gathers many functions, including MAC Table Informati

User Manual Publication date: March, 2006 Revision A2 78 Port: The port that exists in the searched MAC Entry. VID: VLAN Group that MAC Entry exi

User Manual Publication date: March, 2006 Revision A2 79 Function Name: MAC Table Maintenance Function Description: This function can allow the user

User Manual Publication date: March, 2006 Revision A2 80 Function Name: Static Setting Function Description: The function of Static is used to con

User Manual Publication date: March, 2006 Revision A2 81 Queue: Set up the priority( 0~3) for the MAC. Forwarding Rule: Static: A MAC address is a

Publication date: March, 2006 Revision A2 1 About this user’s manual In this user’s manual, it will not only tell you how to install and connect yo

User Manual Publication date: March, 2006 Revision A2 82 Function name: MAC Alias Function description: MAC Alias function is used to let you assi

User Manual Publication date: March, 2006 Revision A2 83 Parameter description: MAC Address: It is a six-byte long Ethernet hardware address and usu

User Manual Publication date: March, 2006 Revision A2 84 3-8. GVRP Configuration GVRP is an application based on Generic Attribute Registration Pr

User Manual Publication date: March, 2006 Revision A2 85 Function name: GVRP Config Function description: In the function of GVRP Config, it is use

User Manual Publication date: March, 2006 Revision A2 86 Normal: It is Normal Registration. The Registrar responds normally to incoming GARP mes

User Manual Publication date: March, 2006 Revision A2 87 Function name: GVRP Counter Function description: All GVRP counters are mainly divided into

User Manual Publication date: March, 2006 Revision A2 88 LeaveEmpty Message Packets: Number of GARP BPDU with Leave Empty message is received by

User Manual Publication date: March, 2006 Revision A2 89 Function name: GVRP Group Information Function description: To show the dynamic group membe

User Manual Publication date: March, 2006 Revision A2 90 3-9. STP Configuration The Spanning Tree Protocol (STP) is a standardized method (IEEE 80

User Manual Publication date: March, 2006 Revision A2 91 All bridges in the LAN will re-learn and determine which the root bridge is. Maximum Age tim